Skip to content
Premium DTF Film & DTF Powder Bundle – 23.6" × 328 ft Premium Instant Peel Film Roll + 2.2 lbs DTF Powder

Premium DTF Film & DTF Powder Bundle – 23.6" × 328 ft Premium Instant Peel Film Roll + 2.2 lbs DTF Powder

by PRINTIUM
Save 5% Save 5%
$118.00
$118.00 - $118.00
$118.00
$112.19
$112.19 - $112.19
$112.19
Features

Premium DTF Film & DTF Powder Bundle

23.6" × 328 ft Premium Instant Peel Film Roll + 2.2 lbs DTF Powder


The two supplies that run out together  bundled into one order.

Every roll of DTF film needs a matching supply of adhesive powder. This bundle pairs the 23.6" Premium Instant Peel DTF Film Roll with a full kilogram of Printium DTF Powder Premium so both are ready when you load the printer. No separate orders, no running out of powder mid-roll.


23.6" Instant Peel DTF Film Roll

Double-sided anti-static matte coating engineered for roll-to-roll production environments. High ink absorption capacity handles full CMYK and White ink loads without puddling or bleeding  sharp edges stay sharp from the first meter to the last.

Instant hot peel means you pull the film the moment it comes off the heat press. No cooling period, no production pause, no queue of transfers waiting to cool. Cold peel is also supported for workflows that prefer it.

- 23.6" wide × 328 ft long — 3-inch industrial core
- Double-sided anti-static matte coating
- Instant hot peel  pull immediately off the press, cold peel compatible
- Anti-static treatment  powder adheres only where ink lands, no static ghosting
- Sharp edge definition on small text and intricate artwork
- Residue-free release  clean peel every time
- Soft-hand feel with crack and peel resistance
- Compatible with all 60cm roll-to-roll DTF printers
- Cotton, polyester, and blended fabrics


 Printium Premium DTF Powder, 1 kg

80–180 micron fine-grain TPU adhesive with nano-particle technology for uniform distribution across the full print width. At 23.6 inches wide, even powder coverage matters more than ever — uneven application across a wide format shows in the finished transfer. Powder Premium's fine grain and anti-static formula ensure consistent adhesion from edge to edge.

- 80–180 micron fine-grain TPU  consistent coverage at full 23.6" width
- Nano-particle technology for uniform grain distribution
- Anti-static coating — precise adhesion only to inked areas
- Melting point: 110–125°C | Heat press: 130–160°C, 25–38 psi
- Clear drying finish — no visible residue after transfer
- Soft-hand feel, stretch and crack resistant
- 50+ wash cycles


Built for Roll-to-Roll Production

Print → powder within 60 seconds → cure → press → instant peel → next transfer. At 23.6" wide, this film is built for shops running continuous roll-to-roll production — gang sheets, multi-design runs, high-volume batch printing. Powder Premium's fine grain distributes evenly across the full width without clumping, and the anti-static treatment on both film and powder work together to keep transfer edges clean at any print size.

Compatible With

Printers: All 60cm (23.6") roll-to-roll DTF printers
Fabrics: Cotton, polyester, and blended fabrics
Inks: All DTF water-based pigment inks, including Printium CMYKWW


Specifications

1× Premium Instant Peel DTF Film Roll 23.6" × 328 ft
1× Printium DTF Powder Premium 1 kg / 2.2 lbs


Premium Instant Peel DTF Film Roll 23.6" × 328 ft
Size: 23.6" (width) x 328' (length)
Type: Instant Peel Premium Double Matte DTF PET Film
Peel Type: Instant/Hot peel (no wait time)
Material: High-quality PET film with instant release, anti-static, anti-slip layers, and ink-absorbing layers
Ink Compatibility: Works with DTF printers using water-based inks
Recommended Transfer Temperature: 280-320°F (138-160°C)
Recommended Press Time: 8-10 seconds (depends on fabric type)
Storage Conditions: Store in a cool, dry place, away from direct sunlight


Printium DTF Powder Premium 1 kg / 2.2 lbs
Size: 1 kg (approximately 2.2 lbs)
Micron Size: 80-180 microns
Type: Premium DTF Transfer Powder
Melting Range: 240°-280°F (115°-140°C)
Pressing Range: 260–320°F with medium pressure (25–38 psi)
Color: White
Compatibility: Works with all DTF inks and films

Instructions

Premium Instant Peel DTF Film Roll 23.6" × 328 ft
Print your design: Load the film into your DTF printer and print your design using high-quality DTF inks.
Apply Powder: Once the design is printed, evenly apply the DTF powder. Shake off any excess powder.
Cure the Design: Place the printed film in a DTF dryer to cure the powder and ink.
Heat Pressing: Place the film onto your garment and heat press at 280-320°F (138-160°C) for 8-10 seconds.
Peel: After heat pressing, peel the film instantly while it’s still hot—no need to wait for the garment to cool down.
Cool and Finish: Let the garment cool. The design will set as it cools.
Storage: Store unused film rolls in a cool, dry place, away from direct sunlight. Keep the rolls sealed in their original packaging or protective film to avoid dust and dirt.
Handling Care: Don’t expose the film to high humidity, extreme temperatures, or direct heat, as this could affect the film’s performance.
Avoid Physical Damage: Be careful not to bend, crease, or tear the film. Store rolls horizontally to avoid pressure or deformation that could affect printing quality.


Printium DTF Powder Premium 1 kg / 2.2 lbs
Print Your Design: Load the DTF film into your printer and print your design using high-quality DTF inks.
Apply Powder: Once your design is printed, evenly sprinkle the Premium DTF Powder over the design. Use a shaker to ensure an even coat, then shake off any excess powder.
Cure the Design: Place the printed film in a DTF dryer to cure the ink and powder. This helps ensure proper bonding between the ink and the fabric.
Heat Press: Position the printed film on your garment and apply heat and pressure according to the film's instructions, adjusting time and temperature based on the fabric type for best results.
Peel and Finish: After heat pressing, peel the film (either hot, warm or cold, based on your preference), and allow the garment to cool down. Your design is now ready to wear!
Storage: Store any unused powder in its original sealed packaging. Keep it in a cool, dry place to prevent moisture from affecting its performance.
Handling Care: Be careful when handling the powder to avoid spills or contamination. Always use clean, dry tools to apply the powder.
Avoid Clumping: Make sure the powder is stored in a dry area to prevent clumping or hardening over time.

(