Skip to content
Premium Plus A4 DTF Film Sheets & DTF Powder Bundle – 2 x 50-pack A4 DTF Sheets + 2.2 lbs DTF Powder

Premium Plus A4 DTF Film Sheets & DTF Powder Bundle – 2 x 50-pack A4 DTF Sheets + 2.2 lbs DTF Powder

by PRINTIUM
Save 5% Save 5%
$44.97
$44.97 - $44.97
$44.97
$42.69
$42.69 - $42.69
$42.69
Features

Print more. Peel faster. Never run out mid-job.

  The Premium Plus DTF Print Bundle gives you two 50-packs of our top-tier Premium Plus A4 DTF Film 100 sheets total, paired with a full 1 kg bag of Printium Premium DTF Powder. Everything you need to go from file to finished transfer, without piecing together separate orders.

Premium Plus Film, Nano-Matte Instant Peel.

Premium Plus is our advanced-tier A4 film, built for shops that need speed without sacrificing quality. The nano-matte coating delivers tighter ink absorption and sharper edge definition than standard matte film, critical for small text, fine-line artwork, and photographic gradients.

The instant hot peel capability means you don't have to wait. Pull the film the moment it comes off the press, keep your production moving, and get the same clean, professional finish every time.

Advanced nano-matte coating, superior ink absorption for fine details
- Instant hot peel, no cooling wait, faster production throughput
- Reliability: Every sheet is inspected for coating consistency.
- Anti-static treatment for clean, precise powder adhesion
- Sharp edge definition on small text and intricate artwork
- Universal compatibility with all desktop and industrial DTF printers
- 50+ wash cycle durability

Premium DTF Powder Fine Grain, Strong Bond.

High-purity 80–180 micron TPU adhesive formulated to melt cleanly, bond permanently, and cure to a soft flexible finish. The nano-particle grain distribution matches the precision of Premium Plus film — no clumping, no uneven coverage, no stiff transfers.

- 80–180 micron fine-grain TPU adhesive
- Nano-particle technology for uniform distribution
- Melting point: 110–125°C (230–257°F)
- Heat press range: 130–160°C, 25–38 psi
- Anti-static coating  powder only where ink lands
- Soft-hand feel  moves with the fabric, never cracks
- 50+ wash cycles, stretch-resistant bond

Built for the Same Workflow

Premium Plus film's nano-matte surface and Powder Premium's fine-grain formula are matched for the same process: print wet, apply powder within 60 seconds, cure at 230–280°F, press at 320°F for 15 seconds, then peel immediately while hot. Start the next transfer right away.

No compatibility questions. No mismatched specs. One bundle, one workflow.

Compatible With

Fabrics: Cotton, polyester, nylon, denim, canvas, leather, spandex, and blended fabrics
Printers: All modified desktop DTF printers (Epson L805, L1800, ET-8550, XP-15000) and industrial systems
Inks: All DTF water-based pigment inks, including Printium CMYKWW

 

Specifications

Premium Plus A4 DTF Film Sheets

Size: A4 - 8.3" (width) x 11.7" (length)

Type: Instant Peel Double Matte DTF PET Film

Peel Type: Instant/Hot peel (no wait time)

Material: High-quality PET film with instant release, anti-static, anti-slip layers, and ink-absorbing layers

Ink Compatibility: Works with flat-bed DTF printers using water-based inks

Recommended Transfer Temperature: 270-310°F (132-155°C)

Recommended Press Time: 4-5 seconds (depends on fabric type)

Storage Conditions: Store in a cool, dry place, away from direct sunlight

Printium DTF Powder Premium

Size: 1 kg (approximately 2.2 lbs)

Micron Size: 80-180 microns

Type: Premium DTF Transfer Powder

Melting Range: 240°-280°F (115°-140°C)

Pressing Range: 260–320°F with medium pressure (25–38 psi)

Color: White

Compatibility: Works with all DTF inks and films

Instructions

Premium Plus A4 DTF Film Sheets

Print your design: Load the film into your DTF printer and print your design using high-quality DTF inks.

Apply Powder: Once the design is printed, evenly apply the DTF powder. Shake off any excess powder.

Cure the Design: Place the printed film in a DTF dryer to cure the powder and ink.

Heat Pressing: Place the film onto your garment and heat press at 270-310°F (132-155°C) for 4-5 seconds.

Peel: After heat pressing, peel the film instantly while it’s still hot—no need to wait for the garment to cool down.

Cool and Finish: Let the garment cool. The design will set as it cools.

Storage: Store unused film rolls in a cool, dry place, away from direct sunlight. Keep the rolls sealed in their original packaging or protective film to avoid dust and dirt.

Handling Care: Don’t expose the film to high humidity, extreme temperatures, or direct heat, as this could affect the film’s performance.

Avoid Physical Damage: Be careful not to bend, crease, or tear the film. Store rolls horizontally to avoid pressure or deformation that could affect printing quality.

Printium DTF Powder Premium

Print Your Design: Load the DTF film into your printer and print your design using high-quality DTF inks.

Apply Powder: Once your design is printed, evenly sprinkle the Premium DTF Powder over the design. Use a shaker to ensure an even coat, then shake off any excess powder.

Cure the Design: Place the printed film in a DTF dryer to cure the ink and powder. This helps ensure proper bonding between the ink and the fabric.

Heat Press: Position the printed film on your garment and apply heat and pressure according to the film's instructions, adjusting time and temperature based on the fabric type for best results.

Peel and Finish: After heat pressing, peel the film (either hot, warm or cold, based on your preference), and allow the garment to cool down. Your design is now ready to wear!

Storage: Store any unused powder in its original sealed packaging. Keep it in a cool, dry place to prevent moisture from affecting its performance.

Handling Care: Be careful when handling the powder to avoid spills or contamination. Always use clean, dry tools to apply the powder.

Avoid Clumping: Make sure the powder is stored in a dry area to prevent clumping or hardening over time.

(