Skip to content
White Ink & Film Bundle

White Ink & Film Bundle

by PRINTIUM
Save 5% Save 5%
$283.98
$283.98 - $283.98
$283.98
$269.78
$269.78 - $269.78
$269.78
Features

Printium Premium DTF Ink & White (2×1L) & 23.6" Instant Peel Film Roll Bundle (2 Rolls)

Printium Premium DTF Ink, White

High-grade Titanium Dioxide formula delivers maximum opacity in a single pass  the foundation layer that makes CMYK colors read true on dark and colored fabrics. Advanced suspension technology keeps the TiO₂ evenly distributed for consistent coverage bottle to bottle, with an anti-yellowing formula that holds up under heat press.

High-opacity White with Titanium Dioxide  maximum coverage on dark fabrics
- Advanced suspension technology  consistent pigment distribution, no settling
- Anti-yellowing formula  no color shift under heat
- Anti-clogging formula  advanced humectants protect nozzles during idle periods
- Soft-hand feel after transfer, 50+ wash cycles
- Compatible with Epson-based desktop and industrial DTF printers

23.6" Instant Peel Premium DTF Film Roll

High quality PET film with instant release, anti-static, anti-slip, and ink absorbing layers. Double sided anti static matte coating handles full CMYK and White ink loads without puddling or bleeding. Instant peel means no cooling time, pull the film right off the press and keep moving.

  - 23.6" wide by 328 ft long, 3 inch industrial core
  - PET film with instant release, anti-static, anti-slip, and ink absorbing layers
  - Double sided anti static matte coating
  - Instant/hot peel, no cooling time required
  - Compatible with all 60cm roll to roll DTF printers
  - Works on cotton, polyester, blends, light and dark colored materials

Built to Work Together

White ink lays the foundation, the film carries it. At 23.6" wide, this roll is built for continuous production  gang sheets, multi-design runs, high-volume batch printing  and White is the highest-consumption channel in every one of those runs. Pairing them keeps your most-used supplies stocked at the same time.

Specifications

Premium Instant Peel DTF Film Roll 23.6"


- Dimensions: 23.6" × 328 ft (60cm × 100m)
- Core: 3-inch industrial core
- Coating: Double-sided anti-static matte
- Peel Type: Instant hot peel + cold peel compatible
- Compatible Printers: All 60cm roll-to-roll DTF printers
- Compatible Fabrics: Cotton, polyester, and blended fabrics

Printium Premium DTF Ink White


- Volume: 1,000ml (2.64 lbs) per bottle
- Shelf Life: Up to 12 months
- Heat Press Setting: 320°F, 15 seconds
- Compatible Printers: Epson I3200-A1, XP600, DX5, DX7, I1600, 4720, TX800, L1800, I390

Instructions

Printium Premium DTF Ink White
1. Shake thoroughly before each use to redistribute TiO₂ pigment
2. Load into your Epson-based DTF printer's white ink channel
3. Print the white underbase layer first, beneath the CMYK design
4. Store in a cool, dark location (57–77°F / 14–25°C); reseal tightly after each session

23.6" Instant Peel Film Roll
1. Load into your 60cm roll-to-roll DTF printer per manufacturer setup
2. Print CMYK design over the white underbase
3. Apply DTF powder evenly over wet ink within 60 seconds
4. Cure, then press at 320°F for 15 seconds
5. Peel hot immediately (instant peel) or allow to cool first (cold peel)
6. Store the unused roll sealed and away from humidity

(