Size: 23.6" (width) x 325' (length)

Type: Glitter-coated single side DTF Film

Peel Type: Cold peel

Ink Compatibility: Works with DTF printers using water-based inks

Recommended Transfer Temperature: 300-320°F (149-160°C)

Recommended Press Time: 8-12 seconds (depends on fabric type)

Storage Conditions: Store in a cool, dry place, away from direct sunlight

Print Your Design: Load the film into your DTF printer and print your design using white DTF ink.

Apply Powder: Once the design is printed, evenly apply the DTF powder. Shake off any excess powder.

Cure the Design: Place the printed film in a DTF dryer to cure the powder and ink.

Heat Pressing: Place the film onto your garment and heat press at 300-320°F (149-160°C) for 8-12 seconds.

Peel: After heat pressing, wait for 8-10 second and peel the film afterwards.

Storage: Store unused film rolls in a cool, dry place, away from direct sunlight. Keep the rolls sealed in their original packaging or protective film to avoid dust and dirt.

Handling Care: Don’t expose the film to high humidity, extreme temperatures, or direct heat, as this could affect the film’s performance.

Avoid Physical Damage: Be careful not to bend, crease, or tear the film. Store rolls horizontally to avoid pressure or deformation that could affect printing quality.